Joining stitches by grafting – a right-handed knitting tutorial

Two pieces of mustard stocking stitch joined by grafting with pink yarn

How to join knitting seamlessly

Grafting is used to make an invisible join between two sets of live stitches (still on the knitting needles). It is worked using a tapestry needle and yarn, and although it is sewn, it looks like a row of knitting.

Grafting is one of several techniques used in seamless knitting. Others include:

  • Provisional cast-on.
  • Knitting in the round.
  • Picking up stitches along an edge.
  • Three-needle cast-off.

In this blog post, I’m going to show you how to do how to graft two pieces of stocking stitch together.

The following explanations and images are for those who knit right-handed, that is, your working hand is your right hand (regardless of which hand you use to hold the yarn) and the stitches move from your left-hand needle to your right-hand needle as you knit. If you knit left-handed, then go to this blog post: Joining stitches by grafting – a tutorial for knitting right-handed.

NB: if you’re left-handed and knit right-handed, you may find it easier to graft the left-handed way.

Grafting

I’m going to break down grafting into the following stages:

  1. Preparation.
  2. Set-up: two steps.
  3. Stitching: four steps.
  4. Finishing: two steps.
  5. Neatening.

Preparation for grafting

If you are working in rows, place the two pieces of knitting purl sides together with the needles pointing to the right. Make sure that the yarn end attached to the knitting is on the right at the back. Finish each piece of knitting with a right side row.

If you are working in rounds, divide your stitches between two needles. Make sure there is the same number of stitches on each needle. For example, if you are finishing the toe of a sock, place the stitches for the sole on one needle and the stitches for the top of the foot on another needle. The yarn end attached to the knitting should be on the right at the back.

Use the yarn end to thread your yarn needle.

Hold the two knitting needles in your left hand and the yarn needle in your right. From now on I’ll refer to the knitting needles as front or back needle.

Start grafting by holding two pieces of knitting purl sides together with yarn at back

I’m going to use bright pink yarn for my Kitchener stitch to make it easy for you to follow each step.

Setting up

Set-up step 1

Insert the yarn needle into the first stitch on the front needle as if to purl (purlwise or from right to left) and pull it through, leaving the stitch on the needle.

Set-up step 1a: Pass yarn needle purlwise through first stitch on front needle
Set-up step 1b: Leave stitch on needle

Set-up step 2

Insert the yarn needle into the first stitch on the back needle as if to knit (knitwise or from left to right) and pull it through, leaving the stitch on the needle.

Set-up step 2a: Pass yarn needle knitwise through first stitch on the back needle
Set-up step 2b: Leave stitch on needle.

Stitching

Stitching step 1

Insert the yarn needle into the first stitch on the front needle as if to knit and pull it through, slipping the stitch off the needle.

Stitching step 1a: Pass yarn needle knitwise through first stitch on front needle.
Stitching step 1b: Slip stitch off needle

You can see the first stitch in pink!

Stitching step 2

Insert the yarn needle into the next stitch on the front needle as if to purl, leaving the stitch on the needle.

Stitching step 2a: Pass yarn needle purlwise through next stitch on front needle
Stitching step 2b: Leave stitch on needle

Stitching step 3

Insert the yarn needle into the first stitch on the back needle as if to purl and pull it through, slipping the stitch off the needle.

Stitching step 3a: Pass yarn needle purlwise through first stitch on back needle
Stitching step 3b: Slip stitch off needle

Stitching step 4

Insert the yarn needle into the next stitch on the back needle as if to knit, leaving the stitch on the needle.

Stitching step 4a: Pass yarn needle knitwise through next stitch on back needle
Stitching step 4b: Leave stitch on needle

Repeat steps 1-4 until you have grafted all stitches. You may find that chanting “knit, purl, purl, knit” helps. Keep the tension of your sewn stitches slightly loose; you’ll adjust it later to match the tension of your knitted stitches.

You may be able to combine steps 1 and 2 into a single movement, and steps 3 and 4 as well.

If you need to stop make sure that you have completed step 4 so you know where to start again.

Finishing

Finishing step 1

At the end of the row, you’ll have one stitch remaining on each needle. Repeat stitching step 1: Insert the yarn needle into the first stitch on the front needle as if to knit and pull it through, slipping the stitch off the needle.

Finishing step 1: Pass yarn needle knitwise through last stitch on front needle and slip off needle

Finishing step 2

Repeat stitching step 3: Insert the yarn needle into the first stitch on the back needle as if to purl and pull it through, slipping the stitch off the needle.

Finishing step 2: Pass yarn needle purlwise through last stitch on back needle and slip stitch off needle

Neatening

You’ll now look at your stitching and probably think: ugh! Some stitches will be too loose, some too tight and some just right. It’s tricky to graft with the same tension as your knitted stitches. Your stitches may be too tight or too loose! However, have no fear; this is easy to sort out!

Neating grafted stitches use yarn needle to ease yarn along row so tension of sewn stitches matches that of knitted stitches

Use your yarn needle to ease the yarn along the row, one stitch at a time, so that the tension of your sewn stitches matches that of your knitted stitches. You’ll be moving the excess yarn along to the left.

That looks better, doesn’t it!

Two pieces of mustard stocking stitch joined by grafting with pink yarn

Where to use grafting?

Use grafting to join two pieces of knitting where a seam might be uncomfortable or where you would like an invisible seam. Here are some examples:

  • Finishing sock toes, e.g. Sweet Dreams socks.
  • Joining the two ends of a cowl knit in rows from a provisional cast-on, e.g. Cymru cowl.
  • Knitting a scarf with matching ends, e.g. knit two pieces from the middle (starting with a provisional cast-on), then remove the waste yarn and graft together the two sets of live stitches.
  • Knitting a scarf with matching ends. e.g. knit two pieces from the cast-on edge to the middle, then graft together the two sets of live stitches.
  • Making a seamless cushion, e.g. Fair Isle lavender bags.

However, don’t use grafting where a bound-off edge is needed to stabilise a seam, for example, shoulder seams on heavy garments.

Why is grafting also known as Kitchener Stitch?

The story is that Field Marshal Horatio Herbert Kitchener, 1st Earl Kitchener (who was featured on the “Your Country Needs You” poster from World War I), was concerned about soldiers getting blisters on their feet due to the seams over the top of the toe or at the tip of the toe rubbing. It is said that he invented a smooth way to finish the toe seam which therefore was named Kitchener stitch after him.

Of course, Kitchener stitch is just grafting, which was in use long before WW1. Richard Rudd (A History of Hand Knitting) states that the earliest known reference, in the Oxford English Dictionary, to grafting was in 1880, somewhat before World War I. Furthermore, Rudd doesn’t mention Kitchener stitch at all. So, maybe Kitchener helped this technique become more widely known and used.

This Post Has 3 Comments

  1. Margaret Stanley

    Thank you for the newsletter, Nicki. I’m looking forward to some one-on-ones when we are released from our cells. The Kitchener stitch looks very interesting and I would like to learn more about when I can use it during one of our sessions.
    Keep well
    Regards
    Margaret

    1. Being Knitterly

      Thank you, Margaret. While we are in lockdown, I’m making plans for when it finishes!

Comments are closed.